LIQUID COOLER ARCTIC FREEZER III PRO 360 A-RGB

Përshkrimi

LIQUID COOLER ARCTIC FREEZER III PRO 360 A-RGB Arctic Liquid Freezer III Pro A-RGB: bright and powerful With the Liquid Freezer III Pro A-RGB all-in-one liquid CPU cooling kit, Arctic puts all its know-how at the service of gaming thanks to an improved pump specially developed in-house and controlled by PWM.Thanks to this system, it doesn’t run at full load all the time, but adjusts its operation to the processor’s temperature to limit its noise level at idle.The system is completed by high static pressure fans and another 60 mm fan near the pump in charge of cooling the motherboard’s VRM circuits. Take advantage of Arctic expertise • The Liquid Freezer III Pro A-RGB is ready to use thanks to its pre-installed radiator fans in push configuration. • With the splitter cable, the pump, VRM fan and radiator fans can be controlled separately or synchronised via a single PWM signal with the all-in-one cable • MX-6 thermal paste included • PWM-controlled 60 mm VRM fan provides socket area cooling when VRM cooling is insufficient, in case of poor airflow or especially in overclocking scenarios • The Liquid Freezer III Pro A-RGB is equipped with a specially developed in-house PWM-controlled water pump that has been optimised in terms of performance and noise. • Improved cold plate with extended fin surface and optimised water lines allows the Liquid Freezer III Pro A-RGB to increase performance while maintaining quiet operation • The cooling surface area of the 38mm thick radiator has been extended by 23% thanks to an increased fin stack. This means not only better heat dissipation, but also a greater volume of liquid. • The Liquid Freezer III Pro A-RGB is based on the P Pro series fans, which have a high static pressure General Specifications TIM MX-6 (0.8 g) Operating Ambient Temperature 0—40 °C Pump 800–2800 rpm (PWM controlled) Current | Voltage 0.35 A | 12 V DC Cold Plate Copper, Micro Skived Fins Tube Length 450 mm Tube Diameter Outer: 12.4 mm Inner: 6.0 mm Weight 2005 g Compatibillity Intel LGA1851, LGA1700 AMD AM5, AM4 PI | NNPI 396 | 326 Radiator Material Aluminium Dimensions 398 (L) x 120 (W) x 38 (H) mm VRM Module VRM Fan 400–2500 rpm (PWM-controlled) Current | Voltage 0.05 A | 12 V DC LEDs 12x A-RGB Gen2 LEDs Current | Voltage 0.40 A | 5 V DC Radiator Fan General 3x P12 Pro A-RGB Speed 600–3000 rpm Airflow 77 cfm | 131 m³/h 3 /h Static Pressure 6.9 mmH 2 O Bearing Fluid Dynamic Bearing Current | Voltage 0.33 A | 12 V DC Connector 4-Pin Fan Plug RGB LEDs 12x A-RGB Gen2 LEDs Current | Voltage 0.40 A | 5 V DC Connector 3-Pin A-RGB Plug + 3-Pin Socket